Speed & acceleration
Animate travel, rotation, reciprocation and acceleration.
Open tool →See what the numbers mean.
19 visual tools within the Core Links free-tools site.
Size
View dimensions on the same scale as A4 paper.
Open tool →Volume flow & velocity
Inspect average velocity and transit time from diameter and volume flow.
Open tool →Viscosity
What changes when viscosity changes in the same pipe at the same pressure difference? Inspect a transparent pipe and its velocity profile.
Open tool →Wind
Follow marked air through an illustrated wind tunnel. Change airspeed to inspect transit time and dynamic pressure.
Open tool →Hardness
Visualize an ideal Vickers indentation from hardness HV and test force. Higher HV gives a smaller impression at the same force.
Open tool →Bending
Inspect a shaded beam under load. Change thickness, length and Young’s modulus to explore deflection.
Open tool →Shore hardness
Compare matching rubber pads being pressed. This is a tactile illustration, rather than a hardness-testing instrument.
Open tool →Slope
Switch between degrees, percent grade and 1:n to inspect horizontal run and rise.
Open tool →Vibration
Watch a spring-supported platform move vertically alongside its displacement trace.
Open tool →Gears & pulleys
Switch between external gears and an open belt to inspect speed ratios and rotation direction.
Open tool →Clearance & tolerances
Enter nominal dimensions and deviations to inspect the clearance range in an enlarged section.
Open tool →Force & weight
Relate force to the mass it supports under standard gravity.
Open tool →Torque & leverage
Inspect wrench effort from torque, handle length and force angle.
Open tool →Pressure & area
Enter force on a circular face to inspect average pressure.
Open tool →Spring
Inspect linear spring compression from stiffness and load.
Open tool →Thermal expansion
Inspect free expansion from coefficient, initial length and temperature change.
Open tool →Removal space
Compare straight withdrawal length with available space.
Open tool →Sound frequency
Inspect frequency and period. A short sine tone plays only when requested.
Open tool →Start with one condition; add a comparison only when needed. Check the explanation and applicability on each page.